For OneXPlayer 2 / 2 PRO Detachable Handle Connector For 8.4" OXP2 Game Console Laptop Original Connector V-LED Light 5V Type-C 1600mAh
NOTE:First use must be paired! joystick calibration, Please read the instruction manual and operation manual carefully!
Q1: Can I use the phone charger to charge the base?
(Any Type-C charger is OK. The base built-in intelligent charging identification chip defaults using of 5V/1A charging to protection battery.)
Q2: Can I connect the wireless controller dock to other consoles/desktops?
a) Directly connect the receiver to another host/desktop
b) Please switch the console to the keyboard and mouse model (or disable the xbox driver that comes with the console itself)when connecting the receiver to the console with controllers, because the default controller is player 1 or controller1, and the wireless controller is player 2 or controller 2.
Q3: Is it possible to implement two-player game mode?
a) Two sets of OXP2 wireless controller base
b) Using a set of OXP2 wireless controller base +a Bluetooth controller
c) Using a set of OXP2 wireless controller base +a console with controllers
d) Using a Bluetooth controller + a console with controllers
Q4: Does the wireless controller base support automatic adjustment of ALPS
or Hall joysticks?
a) ALPS and Hall joystick firmware are built into the wireless joystick base, which can automatically identify the gamepads purchased by users without updatingsoftware.
b) The left and right handles must be the same rocker (ALPS rocker on one side and hall rocker on the other side cannot be used)
Q5: Can the left and right handles not be removed from the host when the
wireless handle base is manually calibrated?
(The left and right handles must be installed and connected to the base when the wireless handle base is manually calibrated.)
Q6: Can the receiver in the base be used for other bases?
(The receiver can be paired with any docking station, and the wireless connection with the current docking station is established by default, and the previous docking station is automatically unpaired.)
Q7: The receiver in the base is broken or lost, can I buy the receiver
(The receiver can be paired with any base, and the newly purchased receiver (according to the instructions) can be used directly with the base.)
Q8: Can the receiver in the base be paired with 2 or more bases at the same
(The receiver can only be paired with one base at a time, and the previous base is automatically unpaired.)
Q9: Can I turn off the atmosphere lights on the left and right handles and the V-
shaped atmosphere lights on the base?
(Long press the LED button under the right handle to turn off or on the "left and Right handle/base V-shaped" atmosphere light.)
Power button:Long press 2s to turn on/off the handheld connector; Short press to go to sleep/wake up the handheld connector
Pair button: Short press to enter pairing status
Press the picker to bring up the receiver
Signal Receiver Organizer
Product bottom: Type-C charger port
Handle disassembly: Long press the back of the handle button, push up the handle gently to disassembly at the same time.
Step 1: handle's default state (Xbox360 handle mode), while long press the [Back] button + [Start] button for about 5 seconds, they can be released when the LED light blinks;
Step 2: first let left and right joystick to the maximum tilt angle gently rotate 3 circles to calibrate the joystick,
and then press the left and right trigger buttons for 3 times to calibrate the motor;
Step 3: press the Y button to save and exit the calibration mode.
When left and right handles are successfully connected to the connector, the LED light is always on when the connector is on; long press the [LED] button to turn on/off the LED light.
Note:The handheld connector will record the LED light status and keep last time LED light status when turning on/waking up again.
The stand has a built-in transmitter and can be connected to the OneXPlayer2 host through the receiver. Pairing is required for the first use, and after successful pairing, the joystick stand will automatically connect to the receiver when it is turned on for subsequent use, no need for further pairing.
You need to pair it with the receiver when it is used for the first time. Steps as below.
1. Keep pressing the power button 2s to turn on the connector, enter the signal search state, then the Pair button indicator (green) flashes rapidly, flashing an interval of about 1s.
2. Press the Pair button to enter the pairing state, then the Pair button indicator (green) blinks slowly flashing interval of about 2s.
3. Plug the receiver into the USB-A port on the OneXPlayer2 host, the connector will be automatically paired with the
receiver for connection, after the successful pairing connection, the Pair button indicator (green) is on.